Note this configuration will only allow access to the router configuration page if
you have the router (Now access point) connected to the primary router with an Ethernet cable.
The access point (AP) will be on https://192.168.1.2/
Please watch the video completely to understand all the concepts and procedures. Thanks!

You must have DD-WRT installed on an MR7350,MR7340,MR7320,MR7310 prior to using this configuration file.

Available here https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2026/

***Must Do*** 

Connect directly from your computer using an Ethernet cable to any Ethernet LAN port

Reset the router to factory defaults prior to using this file. See Video 

Be patient with the configuration to finish loading it takes a full minute and half to complete.

Log In 
User Name is: admin
Password is: RichardLloydUSA

Password for everything requiring a password is:  RichardLloydUSA

See the full network diagram for this configuration and link for the video here: https://richardlloydusa.com/dd-wrt-ap-192-168-1-2

Please make sure you change all WIFI and Log In passwords. 

Set the Time Zone Basic>Basic Setup Tab near the bottom to your Time Zone

For educational purposes only.

Thanks and Enjoy!
